Synthetic Graphite
High-purity synthetic graphite powders, sized to your process for conductivity, lubrication, and reliable compounding performance.
Sized for Conductivity. Built for Control.
Ei6 supplies synthetic graphite in tightly controlled particle size bands, from sub 10-micron powders for smooth films and conductive fills to coarse granules for friction and structural applications. We align purity, particle size distribution (PSD), and packaging to your line so dosing is predictable and properties stay on target.
Synthetic Graphite
Synthetic Graphite Applications
Conductive, lubricating, and structural fillers across industries
Use synthetic graphite where predictable purity and stable PSD help you hit electrical or thermal targets, reduce friction, or build film integrity. Typical uses include conductive polymers and coatings, dry-film lubricants and greases, friction materials and gasket sheets, and refractory and powder metallurgy (PM) blends. Fine cuts support uniform films and consistent dispersion; coarser grades provide plate-like structure and wear behavior for demanding mixes.
Grades and Sizing
Pick the D50 (or mesh) that matches your process
Choose a micronized grade when you need tight PSD and smooth dispersion; step up to mid-range microns for balanced flow and coverage; select coarse mesh when structure and friction behavior are primary. Our data sheets call out carbon/ash, D10/D50/D90 or mesh fractions, moisture and volatiles so receiving and batching stay straightforward.
How We Help You Specify
Match purity, PSD, and handling to the job
Start with your target property—conductivity, thermal path, friction and wear, or film build—then specify the PSD window your process can meter and disperse cleanly. We’ll recommend a grade that meets your property target while keeping viscosity and agglomeration in check, and we’ll align packaging to your workflow (bags, FIBCs) so material moves smoothly from dock to mix.
Packaging and Delivery
Sized, labeled, and ready for your line
Select moisture-protected paper bags or flexible intermediate bulk containers (FIBCs). Lots are clearly labeled by grade and PSD, with carbon/ash limits and key screens or D-values (D10/D50/D90) called out on paperwork. We can coordinate release schedules and stocking options so the right cut is on your floor when you need it.
- Bagged or FIBC; moisture-controlled packaging
- Clear grade and lot IDs; Certificates of Conformance (CofC) and SDS on request
- Coordinated releases and inventory options to match production
Quality, Documentation, and Support
Straightforward Specs and Clean Paperwork
Each shipment is traceable by lot with grade, purity band, and PSD callouts. On request, we provide particle size distribution data (D10/D50/D90 or mesh fractions), moisture and volatiles confirmation, and CofCs aligned to your receiving checks. Application support is available when you’re tuning between micron cuts or adjusting a formulation.
Ready to Specify a Synthetic Graphite Grade?
Share your application, target D50 or mesh band, purity needs, and packaging preference. We’ll recommend a grade that fits your process and schedule.